01/08/2013 07:25:09 Acerinvest Posts: 4 | Could someone tell me what glue I should use to stick the gasket fluff to the centreboard case. Tweet |
| 01/08/2013 07:38:49 Stephen Williams Posts: 3 | When I have used it , it has come with a self adhesive backing . Tweet |
| 01/08/2013 08:11:04 Acerinvest Posts: 4 | Thanks. The gasket "fluff" looks fine but has pulled away from the casing. I could get some new material but if I could just glue it back on it would seem a simple solution. Tweet |
| 01/08/2013 22:13:32 NJW Posts: 1 | Where did you buy replacment "fluff" from. Just lost 1/2 mine in Grafham. Tweet |
| 02/08/2013 07:00:50 Stephen Williams Posts: 3 |
Tweet |
| 03/08/2013 12:41:01 Acerinvest Posts: 4 | I gather from RS that the self-adhesive backing is not very good and that they use a contact adhesive to stick it better. Any ideas on what adhesive would be best for this. I tried one glue and made a right mess of it. Also, should I start at the trailing edge of the casing i.e. the pointy end? the one fitted seemed to start in the middle which seemed all wrong as it then needs a really sharp bend and the pointy end of the casing. Tweet |